4 Common Ascend FS12T Angler Kayak Hull Problems (With Solutions)

ascend fs12t angler kayak hull problems
ascend fs12t angler kayak hull problems

Finding the right kayak for your fishing trip can be somewhat complex when you’re just getting into fishing. There are a ton of factors that you need to consider, from the type of seat to the stability of the boat. So, make sure to match the specs of the boat with the local water conditions. Seeking opinions from local anglers will improve your perspective on the issue, and you’ll be able to find a better unit for your trips. With that said, quite a few users have been asking about Ascend FS12T angler kayak hull problems. If you are interested in the same model, then the following list of problems should improve your perspective on the issue.

Ascend FS12T Angler Kayak Hull Problems

1. Clogged Scuppers

The first thing that many anglers have pointed out is that the scuppers installed in the hull of this kayak keep getting clogged up. This can lead to many issues with water staying inside the kayak and impacting the stability and speed of the unit. So, it is always best to inspect all six scuppers in the kayak to get ahead of this problem.

All you need to do in this situation is inspect the scuppers on your kayak and drive out any debris or weeds stuck in the system. It shouldn’t be an issue if you clean out the scuppers every week. The cleaning process won’t take much of your time, and the clogged scuppers will work perfectly. So, make sure to set some time aside each week for cleaning the kayak.

2. Decreased Speed

There have been many reports on decreased speed from this kayak because of the wider shape of the hull. While this wider shape brings more stability to the unit, it also provides a larger area for the debris and weeds to get stuck in the unit. So, there is a good chance that you’ll be struggling with decreased speed and similar problems in the future.

The only thing you can do about this issue is clean the hull after every trip. Having minimal weeds and debris stuck on the hull makes it easier for users to maintain their riding speed. So, simply clean the hull, and there will be a substantial boost in the speed of your kayak. On top of that, cleaning the hull each day should minimize the service timing for your unit.

3. Warping Problems

The biggest issue with the Ascend FS12T kayak hull is related to the plastic base warping under pressure. Even though this unit brings a heavier weight capacity, the hull will deform under excessive pressure. Because of that, you won’t get any performance from the kayak. For this reason, the majority of anglers stay away from this boat and prefer to rely on other models for better durability.

To avoid this issue in your kayak, all you can do is decrease the amount of load on the unit. Make sure to take only the necessary equipment and spread out the load. Otherwise, the hull will warp, and it will be impossible to get the desired stability. You can also seek help from local anglers to avoid this problem with the hull warping under excessive load. They will help you better distribute the weight, and you won’t have to worry as much about this issue.

4. Storing Problems

The warping issues with the plastic hull on this boat also lead to several storage problems. In unfavorable storage conditions, the shape of this kayak will be destroyed in no time, and you won’t be able to get anywhere with the unit. So, make sure that there is no excessive moisture or extra load on the boat. Otherwise, you’ll have to deal with the warping issues.

All in all, these were a few issues that discouraged most anglers from investing in this kayak. So, if you were thinking of purchasing this unit because of its cheaper price tag, it would be better to extend your budget and purchase a model with a better hull. Otherwise, you will just be wasting your time trying to keep the kayak in perfect condition. Make sure also to seek opinions from local anglers. They will help you find the perfect balance between price and performance.

Leave a Comment