4 Methods To Solve Garmin Force Anchor Lock Not Working

garmin force anchor lock not working
garmin force anchor lock not working

When you’re looking for easy-to-deploy trolling motors, Garmin Force will always distinguish itself as the most reliable option. There aren’t many brands that can offer the same performance consistency, and you’ll have an amazing experience with this motor. However, that doesn’t mean it is impossible to run into minor issues like the Anchor lock not working.

This feature does malfunction from time to time, but luckily, it is not that hard to fix the issues with Garmin Force Anchor lock not working. So, if you’re stuck in a similar situation where the Garmin Force Anchor Lock won’t work, then the following details are for you.

Garmin Force Anchor Lock Not Working:

  1. Recalibrate Motor

The anchor lock and all other autopilot features will malfunction if you’ve not calibrated the motor yet. Sometimes, adjusting the motor in rough water conditions with high waves can also mess up the system. So, you need to find a calm spot to calibrate the motor and then proceed with the process.

Once you’re in calmer regions and there is a stable spot, just proceed to settings, open up the trolling motor options, and then click on calibrate. A compass will pop up, and you can use the motor controls to follow the instructions presented on the screen. Hopefully, you won’t have to bother with the same complications when the motor is calibrated.

  1. Check GPS Signal Status

The GPS signal status is the next thing you should consider when you’re running into this issue. The anchor lock won’t work until there is a good GPS signal, and you need to check the status light to be sure of the current status. If the status light is red, you will be sure that the anchor mode issues are caused by the poor GPS signals, and you should try to improve the GPS connection to fix the anchor lock performance.

  1. Adjust Motor Depth

At this stage, you should check the depth of the trolling motor. Sometimes, anglers set the trolling motor depth too low, and the motor can get damaged when the water is shallow. This issue is also known to interfere with the anchor lock, and the motor will start behaving erratically when it hits some rocks or pebbles at the bottom of the motor. So, simply bring up the trolling motor and then power cycle your unit before testing out the anchor lock features one more time.

  1. Call Garmin Support

If you’re still stuck in the same problem, and the Garmin Force unit won’t really respond to the anchor lock commands, then you need to reach out to the experts. There is always a possibility that your unit is defective, and reaching out to customer support should address this situation. So, contact the dealer and have him help you fix the anchor lock features.

If the motor is indeed defective, then you can claim the warranty and get a replacement. It shouldn’t be that difficult to secure a replacement if the claim is indeed valid and the motor is defective.

Leave a Comment