Homemade Deep Drop Weights – Step by Step Guide

homemade deep drop weights
homemade deep drop weights

The type of deep drop weights you need for your fishing setup depends entirely upon the depth of the water as well as the velocity of the current. If you’re dealing with rough water conditions, then you’ll have a harder time trying to manage your bait. So, make sure to go heavier on the deep drops, and you’ll get much better fishing results. With that said, quite a few users have been asking about homemade deep drop weights. If you’re eyeing a similar setup, then the following details should help you with a better understanding.

Homemade Deep Drop Weights 

Deep drop weights can be quite expensive, and you’ll have to expand your budget by a substantial margin to get these weights. So, more and more users are shifting towards the use of homemade deep drop weights to minimize cost while also enjoying the same performance from their fishing system. With that said, let’s cover how you can make your own homemade deep drop weights.

  1. To start the process, you’ll need a few basic tools and a metal or plastic tube to fill up with molten metal or concrete. You can go with either one of these methods after checking the local costs of these materials.
  2. Now, if you’re using metal pipes, then it will serve you better to go with molten metal to fill the pipe. So, just heat up some metal wires and other items in a container and pour that into the pipe after inserting a ring to attach to the fishing setup.
  3. Similarly, if you went with the plastic pipe, then you need to pour the mixture into the pipe and let it cure for an appropriate time. The waiting period can vary depending upon the type of concrete mixture you’re using.
  4. Once both of these setups have cured or cooled down, you can weigh them on a scale and use them accordingly on your fishing trips. If you go with the metal alternative, then that weight can be handled with more control as you can reuse metal for more projects and divide weights into smaller sections.
  5. With that said, the wire that you’re using to manage the deep drop weight should have a good amount of tensile strength. Otherwise, these deep drop weights will break away from your fishing system and sink to the bottom of the water. So, it is always best to only rely on strong wires to make the hook for deep drop weights.

All in all, you need to follow these basic steps to create your deep drop weights. You won’t get the perfect accuracy on the weight of these homemade accessories, but with practice, you can come close to replicating accurate deep drop weights from the market. So, don’t get discouraged if the first project doesn’t turn out to be good.

Similarly, using metal pipes will allow you better control the final weights as you can trim away the excess from the final product. So, if you’re comfortable with using molten metal to create deep drop weights, then it will serve you better in the long run.

Leave a Comment