How To Connect Two Humminbird Helix 7 Units? (Answered)

how to connect two humminbird helix 7 units
how to connect two humminbird helix 7 units

The Helix systems maintain their reputation because of the better pricing and a feature-rich setup. You’ll benefit from a bright display that will keep you updated even under direct sunlight. Moreover, the configurations are pretty easy to manage, and the only complicated part is the initial installation.

Many anglers struggle to connect two Humminbird Helix 7 units on their boat. If you’re also running into similar problems with the Helix 7 system, here is how to connect two Humminbird Helix 7 units.

How To Connect Two Humminbird Helix 7 Units? 

To connect the Two Humminbird Helix 7 units, you will need basic accessories like the ethernet cable, adapters, a robust power supply, and transducer cable. If your wiring is in good shape, it shouldn’t be too difficult to set up two Humminbird Helix 7 units on your fishing system. The following steps will further improve your perspective on the connection procedure.

  1. The first step is to connect your ethernet cable with the Helix adapter so that it can be plugged into your Helix units. Make sure that the ethernet cable is long enough to easily reach both units and that there isn’t extra strain on the cable.
  2. After attaching Helix adapters to both sides of the ethernet cable, you can plug these adapters into the back of the main console and the bow unit. Firmly secure the adapter on the ethernet port on both Helix units, and that is enough to get these units talking to each other.
  3. Once the devices are connected through the cable, power up both units and head over to the menu section. Navigate to the network setup, and you’ll be able to source the data from the console Helix 7 unit to the bow Helix 7 unit.
  4. Now, you can complete the setup by connecting the console unit with the transducer and mounting everything in its proper spots. The transducer should be connected to the console unit, and that data will be shared through the network cable to the bow unit.
  5. Lastly, you just have to personalize both units by limiting clutter, optimizing brightness, and overlay, and you’ll be all set. You won’t have to install any additional port accessory to add two units to your boats, and two adapters along with an ethernet cable will do the trick.

The only complicated step here is positioning the Helix units to minimize flex in the ethernet cable, and you’ll get through the configurations in no time. So, make sure to get a long enough ethernet cable and secure it properly to the boat frame if you wish to avoid problems. Otherwise, the cable will get damaged or frayed in no time, and you’ll be looking for a replacement.

If you wish to add more Helix units to your boat, then you’ll have to invest in a five-port accessory. It is pretty affordable, and you can set up five different Helix devices through the port connection. Even if one of the Helix systems is outdated, it should be able to get data from the console system.

Leave a Comment