How To Use Raymarine Radar – Brief Walkthrough

how to use raymarine radar
how to use raymarine radar

Fishing accessories like complete sonar systems and chart plotters can cost you thousands of dollars if you’re purchasing them from reliable brands like Raymarine. Even after this hefty investment, you won’t notice a massive boost in the performance of your fishing system immediately. It can take weeks, if not months, to get used to the basics of how to effectively make use of these fishing accessories. It is not that rare for beginners to get confused about the functionality of the Raymarine radar. From defining zones to setting different ranges, you have to keep track of several features. So, here are some details on how to use the Raymarine Radar.

How To Use Raymarine Radar

Raymarine offers quite a few different models when it comes to fishing radars. The installation of the radar is the most crucial thing that you need to consider when using this system. After setting up the radar on your boat, here are some basics that you can follow to benefit from the surrounding hazards and traffic.

  1. To start, you need to ensure that the cables are in perfect shape and the Raymarine Radar has optimal access to a power source. If the radar is not spinning or the cables are damaged, you won’t get any output on display.
  2. Once the radar is powered up, you need to access the control unit and modify the orientation of the radar. Most anglers prefer to stick with a heads-up orientation, but you should experiment with other options like north up to gain a better perspective.
  3. Then you can proceed to the acquisition features on the Raymarine unit to define the detection zone. This step is pretty crucial as the warnings and alerts about different objects in your zone will be updated after you define the markers through the control unit.
  4. At this point, you can also offset the radar scope for better navigation. So, if you’re planning on using the radar for better maneuverability in narrower regions, then simply offset the unit. Furthermore, anglers like to switch between true motion and relative motion to navigate to different waypoints.
  5. Lastly, you can finish up by adding the overlay to your Navionics system, and you will be all done. It can take quite a bit of your time to get through all of these steps, and personal preferences play a huge role in defining the final presentation on your display.

Overall, these basic steps will help you get started with the Radar navigation, and you should try to focus more on experimenting with different layouts to find the perfect fit. It will take a few weeks to get through all the configurations, and you won’t know what works best for your fishing region until you test out the different features brought forward by Raymarine.

If you’re dealing with any condition where the antenna has stopped moving, then your best move is to call the experts from the Raymarine customer support. You’ve likely messed up the installation, and you should ensure the involvement of the experts to effectively maneuver through this issue.

Leave a Comment