The Humminbird Helix 5 system brings several utility features to the anglers and can be used in all seasons. However, when it comes to the installation of this device, you will run into some complications. So, it is not that rare to see customers complaining about the Humminbird Helix 5 not turning on. These problems are almost always related to power complications or hardware issues. So, you will just have to go through basic troubleshooting methods to isolate the issues with power to your Humminbird Helix 5 system.
Humminbird Helix 5 Won’t Turn On Fix
1. Fix Voltage Issues
The voltage from the power source is the leading cause behind the issue with the Humminbird Helix system not turning on. There is a good chance that your battery is in the same condition, and you need to get a different power source for your Helix system.
It can be a bit expensive to get a new battery, but that is the only solution when you’re dealing with a drained unit. So, just check the power output from the battery with a multimeter and then replace the battery to avoid these power-related issues.
2. Inspect Power Cable
The condition of the power cable is pretty important when you’re running into problems like Helix 5 not starting. If the power cable is kinked or frayed from any section, you will have to get a replacement immediately. There aren’t any quick fixes to this condition, and the only reliable solution is to get a fresh power cable that is not damaged.
3. Clean The Connectors
Sometimes, a bit of rust on the connectors can lead to these issues. It is pretty common for anglers to run into corrosion-related problems with the battery connections. So, you need to get a rust cleaner from the market or develop one yourself with a diluted vinegar solution. This should be enough to get your Humminbird system working again.
4. Check For Hardware Issues
Even when all wiring is perfect, a damaged port on the Humminbird system will create this problem. So, if you’re sure that the battery connections are in good shape and there aren’t any voltage-related complications, then you need to thoroughly inspect the main display for hardware issues.
If the unit is in rough shape or the port is damaged, going to the nearest repair center is your best move. You have to let an expert deal with this issue, and there isn’t much that you can do yourself to fix the Humminbird system.
5. Ask Humminbird Dealer
If the warranty status on your Humminbird system is valid, then contacting the dealer should be your first move. Repairing the unit yourself might void the warranty, and you need to involve the dealer to effectively manage this situation. Make sure to explain the current wiring condition and voltage output from the battery, and demand a replacement if the unit is indeed damaged. That way, you won’t have to waste any money on repairing the system yourself, and you can get a replacement from the Humminbird dealer.