6 Common Raymarine Dragonfly Transducer Problems And How To Fix Them

raymarine dragonfly transducer problems
raymarine dragonfly transducer problems

When it comes to durability, the Raymarine units are not the best in the market. You can’t expect much from these devices as the mounting accessories are pretty subpar. So, even if you’re not pretty happy with the stats on your Raymarine system, then make sure to get a durable set of mounting accessories. Otherwise, you won’t be able to get any performance out of your device.

The Raymarine Dragonfly Transducer has gained a nice reputation in the market because of its amazing images and accurate tracking. However, some anglers also brought up issues with the performance of this unit. These were some of the common problems that anglers complained about while making use of the Raymarine Dragonfly Transducer.

Raymarine Dragonfly Transducer Problems

  1. Lost Bottom Information

The first issue that most anglers complain about is that they won’t get any accurate depth readings from the transducer. This issue is most often related to the angle of the transducer and if you’re sure that the vessel speed is optimal, just check the angle of the unit. There is always a possibility that something hit the transducer and changed its orientation.

You just have to make sure that the transducer is always pointing up and it is not losing its bottom. That should be enough to get your unit working perfectly, and you won’t have to bother with further details. So, if you’re missing depth reading, just go over the unit orientation one more time.

  1. Missing Readings

Sometimes, when the vessel speed is too high, you will start missing reading, and the display won’t present the complete picture. While this can sometimes be linked to the performance of the transducer, it can only capture so much information when you’re moving the vessel at high speeds.

So, you just have to slow your pace down a bit and then check the performance from the transducer. Most often than not, the issue with missed reading will be fixed at this stage, and you’ll get an optimal presentation from the Raymarine Dragonfly transducer.

  1. Distorted Images

The images can get distorted from time to time when the water depth is too shallow or too deep. In both conditions, you won’t be able to get any output from the transducer, and it will only present distorted images. The only thing you can do in this situation is to make sure that the operating conditions are optimal and that you’re not taking the vessel to the shallowest part of the fishing region.

Other than that, there isn’t much that you can do about these images except service the unit and make sure that there is no debris clogging up the bottom section of your transducer. That should be enough to address this situation with distorted images through the transducer.

  1. Responsiveness Issues

The responsiveness issues are mostly related to insufficient voltage to the system. So, if your transducer is behaving erratically, you just need to make sure that the power supply to the unit is optimal. Make sure to change up the battery if it is indeed defective, and that should be enough to fix your situation with Raymarine Dragonfly Transducer not responding to any input.

  1. Corroded Connections

The connections on the unit can also corrode, but this situation will only present itself when you’re servicing the unit. Even if your device is pretty durable, it is only logical to clean it every two weeks for optimal performance.

Otherwise, the connections will corrode, and debris will collect on the bottom of your unit. So, to avoid this situation with the corroded connections, you just have to be proactive and clean up the unit once every two weeks. That way, you won’t even have to think about performance issues.

  1. Damaged Wiring

The wiring can also be annoying with the Raymarine Dragonfly transducer, where you won’t get any information from the device because of damaged wiring. The only thing you can do here is to improve cable management and make sure that there aren’t any dangling wires connected to the unit. That should be enough to secure the wiring, and if the wires are already damaged, then you need to get them replaced. You won’t get any performance out of damaged wiring, and the unit won’t work properly.

Leave a Comment