3 Solutions When Yamaha Outboard Reverse Not Engaging

yamaha outboard reverse not engaging
yamaha outboard reverse not engaging

Yamaha outboards are one of the top options for anglers across the nation. From beginners to experts, every angler relies on Yamaha units for maximum performance and efficiency on the water. So, if you don’t know much about outboards and need a reliable option for your fishing adventure, then Yamaha is one of the safest options for you. With that said, there have been many questions regarding Yamaha Outboard reverse not engaging. If you’re also stuck in a similar problem, then going through the troubleshooting methods mentioned here will help you with the issue.

Yamaha Outboard Reverse Not Engaging

1. Fix Shift Cable

Most often than not, the issue with Yamaha outboard reverse not engaging can be traced back to a defective shift cable. So, you will need to manage the troubleshooting procedure accordingly and start by inspecting the status of this cable. If you’re lucky, then this cable won’t be damaged, and you will just have to fix the orientation of the cable. You just have to adjust the shift cables, and the reverse should start engaging again.

The best thing you can do is manage the plastic clip that is attached to the shift cable and tighten it up a bit. Make sure that there is no excessive slag in the cable and it can operate freely. Hopefully, the issue will be fixed after a little adjustment, and you won’t have to put more than a few minutes into fixing this problem.

2. Check Lower Unit

If you’re sure that there is nothing wrong with the shift cable and it is properly going to the reverse section, then you will have to check the lower unit for possible issues. In most citations, you will find broken metal pieces creating problems with the linkage. So, after checking the status of the shift cable, you should immediately move to fix the lower unit, and it will help you narrow down on the problem.

In these situations, you will mostly have to clear up the broken metal pieces and secure the linkage between the levers. That should get your boat working again, and you won’t have to deal with Yamaha Outboard reverse not engaging.

3. Call an Expert

If you’re still stuck in the same issue and can’t seem to isolate the issue to a defective shift cable, then you need professional help. Make sure to reach out to your dealer and explain this problem to him. If your unit is under warranty, then he will take care of the rest, and you won’t’ have to concern yourself with extending the budget for replacement components.

On the other hand, if your unit is not under warranty, then you can always seek help regarding the replacement procedure. He can also refer you to a local mechanic that will get the issue fixed in no time. So, make sure always to involve the dealer if you run into unexpected problems with the unit. Hopefully, you won’t have to concern yourself with the same issue again after the mechanic has fixed your reverse problem.

Leave a Comment