Matching the weight of the lure to the power of the fishing rods is necesary because the weight of the lure will determine how much the fishing rods bends during a cast. If the lure is too light for the fishing rod, the rod will not bend enough to propel the lure through long distance. However, if the lure is too heavy for the fishing rod, then the fishing rod will bend too deeply, and the lure will add stresses to the fishing rod.
By matching the weight of the lure to the power of the fishing rod, the fishing rod will bend to the correct amount to properly propel the lure of a correct weight. A person may make the mistake of only considering the weight of the lure as listed on the package of the lure. However, the weight of the lure package dont reflect the total weight of the lure when rigged with a trailer hook or soft plastic worm.
How to Match Lure Weight to Your Rod
These add to the weight of the lure; salted baits will also add to the weight of the lure as they absorbs water over time. Therefore, the angler should weigh the total weight of the rigged lure on a digital scale to determine the correct weight of the rigged lure. This will allow a person to properly match the weight of the rigged lure with the power of the fishing rod.
Fishing rods comes in different weights for specific types of lures. For instance, designers design ultralight fishing rods for small lures so that the angler can feel the movement of a fish. In contrast, medium and heavy fishing rods are for fishing with heavier lures like heavy swimbaits or frogs.
Each type of fishing rod will have a natural payload for the lures it are designed for. Using a lure that weighs close to the center of the payload of a fishing rod will allow the fishing rod to produce a cleanly cast of the lure. A person can determine if the weight of the lure is correct by watching the movement of the fishing rod tip after the lure has been cast.
If the fishing rod continues to wobble after the release of the lure, then the lure is too heavy for the rod. The fishing rod will struggle to return to it’s original position due to the heaviness of the lure. Conversely, if the lure falls off the fishing rod tip without propelling the lure, the lure is too light for the fishing rod.
In these situation, the fishing rod should feel smooth when the lure is loaded onto the tip of the rod and the lure should propel without falling off the tip. A smooth load of the lure will indicate that the weight of the lure matches the power of the fishing rod. The weight of the fishing line can also impact the feeling of the weight of the lure when fishing.
The heavier the fishing line, the more friction there will be in the guides of the rod. This will make the lure feel lighter than it actualy is. Therefore, the angler must use a reference grid to determine the correct strength of the fishing line according to the weight of the lure.
This will provide a starting point for the angler fishing gear. However, a person must account for the wind when fishing with these gear setup. When performing a snap cast, care must be taken.
A snap cast can create a shock load on the fishing rod. A shock load results from the use of a violent motion to cast a lure that is too heavy for the fishing rod. This shock load place stress on the graphite material of the fishing rod until the stress break the fishing rod.
If the lure is too heavy for a fishing rod, it is better to use a rod of a higher power rating. Using a rod that is too stiff will not cause the same amount of stress on the rod as using a lure that is too heavy for a rod of a lower power. By matching the weight of the lure to the power of the fishing rod, the angler will have more accuracy when fishing and the fishing rod will last longer.