The type of knot you’re using in the fishing setup can vary depending upon the type of lure and the fishing line you’re using. While it can be overwhelming to educate yourself on all the different types of knots, learning from an expert makes the process much easier. So, you should try to approach local anglers and seek their guidance on strategies that work best in your local water conditions. With that said, there have been many questions on the best knot for the 100 lb. mono line. If you’re also working with a similar setup, then the following list should help you pick the ideal knot for your setup.
The Best Knot For 100 lb Mono
1. Uni Knot
It is one of the simplest options available to the users that will preserve almost all the strength of the fishing line. Even though these knots are not as efficient as crimps, you’ll be able to achieve more than 85 percent line strength on every setup. So, even if you’re using heavy leaders like the 100 lb. mono, the unit knot will fit right into your setup. On top of that, you won’t have to worry about any extensive procedures.
While making a Uni knot, you won’t have to use more than eight turns to secure the line. Using fewer turns on the mainline can impact the overall integrity of the knot. On the other hand, if you go overboard with the number of turns, then the knot will become quite bulky. You won’t be able to manage the final size of this knot when that happens.
With that said, you need to also look into crimps if you’re struggling with the fishing knots. They are much easier to handle and will preserve all the lines straight. So, invest in crimps, and you’ll see a substantial improvement in your fishing system.
2. Nail Knots
Similar to the Uni knot, you’ll be losing a bit of line strength on this unit. However, many anglers have pointed out that it is one of the easiest and most time-efficient knots. So, if you’re new to fishing and don’t want to spend hours perfecting the knot, then the nail knot is your best bet. To manage this fishing knot, all you need is a nail and your leader along with the mainline.
You’ll be using the nail or a screw as support to wrap the leader along the mainline. Ideally, five to seven turns should do the trick. However, you can increase or decrease the number of turns depending upon the size of the knot you’re aiming for. After going around the mainline seven times, you can bring the end of the leader line. Do so through the turns, and then push out the nail.
At this point, you just have to cinch down on the knot, and your setup will be complete. There is no need to bother with any other steps. It will barely take a few minutes, and this fishing knot is quite easy to master. So, if you don’t want to go for the Uni Knot, sticking with Nail Knot should do the trick.
3. Improved Clinch Knot
While most users believe that the clinch knot is only viable for setups under 80 lb. mono line, there are a lot of experts that recommend improved clinch knot for setups up to 150 lb. mono. So, there shouldn’t be an issue when you try to go with an improved clinch knot on your 100 lb. mono line setup. The best thing here is that it will retain more than 85 percent of the strength. All you have to do is manage it correctly.
However, compared to the unit knot and the nail knot, it can be somewhat difficult to master. So, you’ll have to put in the time to master the improved clinch knot. As long as you follow the proper procedure, it won’t look too bulky or out of place when you attach it with the mainline.
All in all, these were a few knot options that can be used when you’re using heavier leaders. In most situations, it is just better to use crimps. That’s because they retain almost 100 percent of the line strength. But, if you don’t have crimps at the moment, then these knots will serve you perfectly.