Issues with the fishing reel can greatly impact your fishing experience. So, if your fishing reel is not working perfectly, you should immediately call an expert to help you manage the problem.
There is no need to spend hours trying to fix the issue yourself, and you should rely on help from a professional working at customer support.
That way, it will be much easier to maneuver around any issue you’re facing with the fishing reel. A few reports have been recorded lately regarding spinning reel drag not clicking.
If you’re in a similar situation and the spinning reel drag is not clicking for you, the following solutions should help you get around this issue.
Spinning Reel Drag Is Not Clicking
What is the function of the spinning reel drag?
The spinning reel drag is one of the most important features of a fishing reel. It helps to control the line and counter the pull of a big fish, allowing anglers to fight against larger catches.
However, when the drag isn’t working properly, it can be extremely frustrating for fishermen, who may need help understanding why their drag isn’t clicking.
To understand why the spinning reel drag isn’t clicking, it is important to know how a spinning reel works.
The drag system of a spinning reel consists of two parts – the spool and the drag knob. As the line is cast from the fishing rod, it passes over the spool and onto the ground.
The drag knob is then used to adjust the tension of the line and how much force can be applied to it. Increasing the tension allows anglers to fight larger fish with a spinning reel.
If a spinning reel drag isn’t clicking when adjusted, several possible causes should be investigated.
The drag knob may not be correctly adjusted. If the knob isn’t tightened enough, it will prevent the drag from clicking when a fish pulls on the line.
A spinning reel might need to be oiled or serviced if it has been used for some time and could perform better. The main spring or drag washers may need to be replaced if they are worn out.
Whatever the cause of a spinning reel drag not clicking, anglers must check their equipment regularly and keep it well-maintained. A spinning reel will last longer and perform better if it is frequently serviced and cleaned.
By regularly checking the drag knob and ensuring it is correctly adjusted, anglers can ensure that their spinning reel drags will always be working properly.
Doing so will help fishermen to land bigger catches with ease. Continue reading as we troubleshoot the issue in detail and provide tips to solve this issue in no time.
- Check Clicker Spring
In most of the newer spinning reels, a spring is attached on the backside of the spool that helps the clicker make contact with the metal piece. So, start the inspection of the problem by checking this spring.
If your drag system works perfectly and you can easily increase or decrease your unit’s drag, you’re probably dealing with a broken spring.
In this situation, most people like to leave the problem as it is, but you can fix the clicking noise by installing a spring replacement.
Luckily, you won’t have to spend minimal money to get a spring replacement, and the procedure is quite straightforward. However, to be safe, you should seek help from an expert while installing the replacement spring in the reel.
The issue with the clicking noise should be fixed after you install the replacement spring in the spinning reel. That way, the clicker will start contacting the metal piece, and you will start hearing the noise again.
- Check Drag Clicker
If the spring in your spinning reel is working perfectly, you’re likely dealing with a broken drag clicker. This component in your spinning reel is located on the back of the spool, and you can easily access it by opening up the unit.
However, if your drag system is working properly and you’re only having issues with no clicking noise, then it might be a better idea to leave the drag system alone.
There is no point in risking the integrity of the whole reel while trying to fix the clicker problem in your unit. On the other hand, if you want to avoid fixing the clicker at all costs, you will have to replace the metal piece inside the spool.
Ideally, the system should start working perfectly if you make the replacement correctly.
So, go to your nearest hardware store and try to purchase a replacement piece for the metal clicker. Once the replacement piece has been installed in the spool, make sure also to readjust the spring and put everything back in its place.
Now, you should check the drag system again to see if there is any clicking noise coming from the system.
- Inspect gear on the shaft
If the spinning reel drag is not clicking, it is important to examine what could be causing the issue. Often, the cause of a reel drag not clicking will be fairly easy to diagnose and even fix.
The most common reasons for a spinning reel drag not clicking are problems with the gear on the shaft or improper lubrication.
When inspecting the gear, ensure all teeth are present and that they have not been broken or damaged. If any teeth are missing or appear worn down, this could cause the drag not to click.
If the gear appears to be misaligned or is stiff when spinning, this could also be a sign that something is off and needs to be addressed.
If it turns out that the gear on the shaft is damaged or worn out, it will need to be replaced. Always use genuine replacement parts when working on fishing reels to ensure they will function properly and efficiently.
Before reassembling the reel, the gear assembly should be lubricated with high-quality reel oil.
The drag knob should also be checked if the drag is not clicking correctly. Ensure that it is adjusted correctly and that no dirt or debris has built up on the inside of the knob, as this could prevent it from operating properly.
If all other components appear to be working correctly and you still cannot get the drag clicking again, there may likely be an internal problem with the reel itself, and a professional should look at it.
If everything appears to be operating as it should, the proper maintenance and lubrication of the reel should get it back up and running.
- Don’t forget to Lubricate
If your spinning reel drag is not clicking, the best course of action is to inspect all components for potential problems. If everything looks good with no visible damage or wear, properly lubricate the reel’s moving parts.
Prolonged use without lubrication can cause the reel to seize and prevent it from working properly.
To avoid any issues, be mindful that you’re using the correct drag setting for the type of fishing you are doing.
If your drag is too tight, it could prevent the reel from clicking properly. Once you have identified the issue and taken all necessary steps to ensure proper maintenance, your reel should be in working condition.
- Call Support
The methods mentioned above were for people that weren’t dealing with defective drag systems. So, if you’re in a situation where the drag system is not engaging and you can’t adjust the intensity of the drag, your best bet is to call customer support.
There is a good chance that some internal components are defective, and you will have to seek help from customer support.
Depending upon your warranty status, you should forward a warranty claim and try to secure a replacement spinning reel for your fishing setup. So, before opening up the reel yourself, share the details of this issue with your dealer.
That way, you won’t have to spend any money securing a replacement spinning reel for your fishing setup.
However, if the warranty has expired, visit your nearest equipment store and have your spinning reel repaired by a professional. If your drag system is working perfectly and you’re only having issues with the clicking noise, you’re dealing with a faulty spring or broken metal piece.
However, if the complete drag system is malfunctioning, you will have to seek help from customer support or certified professionals regarding this problem.