Trolling Depth Calculator: How Deep Is Your Lure Running?

🐟 Trolling Depth Calculator

Calculate exactly how deep your lure is running based on line type, amount out, trolling speed & diver/weight setup

🎯 Quick Presets
⚙️ Setup Parameters
📊 Trolling Depth Results
📋 Line Type Dive Factor Reference
1.00x
Monofilament
Baseline stretch
1.15x
Braided Line
Thinner diameter
1.08x
Fluorocarbon
Dense, low vis
1.22x
Copper Line
Sinks fast
5–8 ft
Lead Core / Color
Per 10-yd color
0.85x
Heavy Mono (25lb+)
More drag/float
-10%
Strong Current
Depth reduction
+5%
Calm Water
Depth bonus
📐 Crankbait Dive Depth by Line Out & Speed
Line Out 2.0 mph 2.5 mph 3.0 mph 3.5 mph 4.0 mph
50 ft (15.2 m)7 ft6 ft5 ft4.5 ft4 ft
75 ft (22.9 m)11 ft9 ft8 ft7 ft6 ft
100 ft (30.5 m)15 ft13 ft11 ft9 ft8 ft
150 ft (45.7 m)22 ft19 ft16 ft14 ft12 ft
200 ft (61 m)29 ft25 ft21 ft18 ft15 ft
250 ft (76.2 m)35 ft30 ft26 ft22 ft18 ft
🐟 Target Species Depth & Trolling Speed Reference
Species Target Depth Target Depth (m) Troll Speed Recommended Line
Walleye8–22 ft2.4–6.7 m1.5–2.5 mph10–14 lb mono
Chinook Salmon40–120 ft12–36.6 m2.0–3.0 mph20–30 lb mono/braid
Coho Salmon20–60 ft6–18.3 m2.5–3.5 mph15–20 lb mono
Rainbow Trout10–30 ft3–9.1 m1.5–2.5 mph8–12 lb mono/fluoro
Lake Trout50–150 ft15–45.7 m2.0–3.0 mphLead core / copper
Striped Bass20–50 ft6–15.2 m3.0–5.0 mph20–40 lb braid
Kokanee20–50 ft6–15.2 m1.0–1.8 mph6–10 lb mono
Muskie / Pike8–25 ft2.4–7.6 m3.0–6.0 mph65–80 lb braid
Largemouth Bass5–20 ft1.5–6 m2.0–4.0 mph10–17 lb fluoro
Mahi-Mahi0–10 ft0–3 m5.0–9.0 mph20–30 lb mono
⛓️ Lead Core Line Depth by Colors Out & Speed
Colors Out Line Out (ft) 2.0 mph Depth 2.5 mph Depth 3.0 mph Depth
1 color27 ft5 ft4 ft3 ft
2 colors54 ft8 ft7 ft6 ft
3 colors81 ft13 ft11 ft9 ft
4 colors108 ft18 ft15 ft13 ft
5 colors135 ft24 ft20 ft17 ft
6 colors162 ft30 ft25 ft21 ft
7 colors189 ft36 ft30 ft25 ft
8 colors216 ft42 ft35 ft29 ft
🔄 Added Weight Depth Increase Reference
Added Weight Added Weight (g) Depth Gained Best Use
0.5 oz14 g+2–3 ftLight snap weight, trout
1 oz28 g+4–5 ftStandard crankbait boost
2 oz57 g+7–9 ftWalleye, bass deep
3 oz85 g+11–13 ftSalmon, trout
4 oz113 g+14–17 ftDeep trolling, lake trout
6 oz170 g+20–24 ftHeavy deep rigs
8 oz227 g+26–30 ftGreat Lakes salmon deep
💡 Depth Calculation Tip: Trolling depth is not linear — the first 100 ft of line out gives you the most depth per foot. After 200+ ft, additional line gives diminishing depth returns. When you need more depth, add weight or switch to denser line (copper or lead core) rather than simply letting out more line.
⚠️ Speed & Depth Relationship: Every 0.5 mph increase in trolling speed reduces running depth by approximately 10–15%. If your crankbait runs 15 ft at 2 mph, expect only 11–12 ft at 3 mph with the same line out. Always recalculate when you change speed, especially when targeting tight depth windows like suspended walleye or thermocline salmon.

Trolling depth is simply how deep your lure sits in the water when you drag it behind your motor boat. The secret for catching fish while trolling comes down to one thing: get the lure down where the fish actually are. It seems easy but finding the right depth is more important than most anglers assume, and luckily there are some reliable ways to do that.

Many believe that you can count it using simple high school geometry, measure the total line length and the angle where it hits the water, and boom, you know the depth. Sounds logical, right? Problem is that the line during trolling almost never stays straight.

How to Find the Right Trolling Depth

Add weight to go deeper and all that math faials. Even with weights the depth does not grow a lot, and simply letting out more line helps less than you hope.

Here is a formula that works quite well: at around 30 degrees the line depth is around half of what your counter shows. If it reads 44 feet with a 30-degree angle, the lure probably sits around 22 feet under the surface. Dump every formula however if you fish in an area full of people and other boats.

Practical tactics help more than pure calculations. One method is cast the rig to a certain distance, then troll slowly up a shelf or ridge until you feel it hit the bottom. Mark that depth and reel in before it snags.

Another way is set a fixed line amount at a steady speed, then find a spot with a flat or slope on your fishfinder to see what happens.

Here is the kicker though, current messes everything up. Most people overlook it. The speed in your calculations is not the GPS speed; it is the real move of your lure through the water.

In a river or sea add the flow to your GPS speed for the actual speed.

Currently apps allow you to choose your line type, lure, weights, divers and combine them however you want. The best use physical math that considers line diameter, length, leader, trolling weight, your speed, lure weight and size to count the trolling depth. They even include water resistance and how different lures and lines sink.

Want to go deeper? Add sinking aids.

So here is Precision Trolling Data, a company that catalogs exactly how deep popular crankbaits, diving planers and sinking lines actually reach. Lead core line gives around 5 feet for 30 feet let out. Crankbaits like Reef Runners reach 30 feet without weights, and Dipsy Divers?

Those can go until 100 feet according to size and howyou have them set.

Trolling Depth Calculator: How Deep Is Your Lure Running?

Leave a Comment