The extensive portfolio of reliable outboards maintained by Suzuki has helped thousands of anglers develop their fishing systems.
These units bring the perfect combination of price point and value to the users. While that might be the case, people must take their time when deciding.
If you’re new to the market and don’t know which outboard to go for, then going through the Suzuki portfolio will give you a better perspective.
Keep in mind that most of the devices are equipped with unique features that will help the devices last a long time.
While the Suzuki motors are amazing to use, some people have also reported running into issues with them. Recently there have been many queries on how to reset Suzuki outboard oil light.
So, if you’re also struggling to manage the reset process, then the following this information will help.
How To Reset Suzuki Outboard Oil Light?
To reset the Suzuki outboard oil light, you don’t have to go through any extensive procedures, and it is rather simple for users to get through the reset process within a few minutes.
The initial steps can vary depending on the outboard model you’re running, but the basic concept follows a few steps.
People should note that generally following these can allow them to reset the device but if they are still having trouble then consulting the manual should help.
With that being said, here are some of the steps that can help you reset the Suzuki Outboard oil light.
- To start the process, you’ll need to set the ignition to the “on” position. This step can vary for users with a keyless unit. So, make sure to follow steps relevant to your outboard model to turn the ignition switch to “on” status.
- Once the switch is set to the “on” position, you can easily pull the emergency stop switch piece from its position to access the switch freely. Keeping the status of the motor “on” is essential as the device should be running during the process.
- Now, all you need to do is pull this emergency stop switch button around three times. Do so until you hear a beeping sound from the system. Ideally, you need to get through this step in under 5 seconds.
- So, make sure to engage the button quickly and don’t provide any delay in the process. If you fail the first time, then repeat the process until you hear the beeping sound. This should be simple, and most users should be able to complete it after a few tries.
- At this point, you can turn the ignition switch off, and that will conclude the resetting procedure. The beeping sound is a clear indication that the motor is now resetting. This is important to keep in mind as some people might ignore looking out for the sound.
- Don’t forget to put the emergency stop switch piece back in its position once you’re done with the process. This should only be removed while resetting the motor and then placed back inside the device. Running the motor without the emergency stop switch can be dangerous.
- Detailed instructions on this process will be mentioned in the owner’s manual. You can also access this manual online, and the steps would be relevant to your specific model. So, it is always best to rely on the instructions from the owner’s manual.
All in all, these were a few basic things to keep in mind when you’re trying to reset Suzuki outboard oil light.
Ideally, you won’t run into any issues. But, if you are slow in pulling the emergency stop switch, then there is a chance that you won’t hear any beeping noise from the system.
So, make sure to perform that step quickly. With that said, you can always seek help from local experts or Suzuki customer support if you’re unable to get through the reset process.
There is a good chance that you’re dealing with a defective switch, and it will be just better to seek help from local experts.
That way, you won’t have to spend as much time trying to isolate or fix the problem. Hopefully, this information will help you manage your outboard.
Though people dealing with a faulty part should note that several other things should be kept in mind.
Having a damaged part on your Suzuki motor means that the problem should be identified as soon as possible.
This can take a lot of time if you are trying to search for the part on your own. Consulting the manual can be helpful but the process will still be difficult for beginners.
This is why you should contact the support team for Suzuki motors instead. They will look into the device and provide you with a list of solutions that can be used.
The team can also reset the outboard oil light for you if required.
If your motor was still under warranty, then all of this can also be done for free. Just go through the guidelines once and check if the device falls under the terms and conditions.
If it does then the brand should be able to find and fix your problem for free.