How To Keep Outboard Motor Straight While Trailering?

how to keep outboard motor straight while trailering
how to keep outboard motor straight while trailering

There are a ton of safety precautions that you have to manage while trailering your board.

From the distribution of weight to managing the hubs on your setup, all of the safety methods help keep your boat secured on the trailer.

Unfortunately, many people don’t pay much attention to these safety steps and run into issues with trailers swaying on the road.

So, to keep yourself and others safe, make sure to follow proper safety procedures to avoid these issues while trailering.

A lot of questions have recently been recorded regarding how to keep the outboard motor straight while trailering . If you’re also unsure about how to secure the outboard motor, then these methods should help.

Make sure that you go through these steps carefully as these will help you out in the long run. There are usually several reasons why people might run into issues with their outboard motor.

This is why it is essential that you check out all of the steps to avoid problems.

How To Keep Outboard Motor Straight While Trailering?

  1. Use Transom Saver

The best way to keep the outboard motor straight while trailering is by attaching a transom saver.

The transom saver will keep your outboard motor from going left or right as you’re trying to secure the connections to the back of your truck.

Ideally, you won’t have to worry about much after securing the motor with the transom saver.

However, if you’re going through some rough roads, then installing additional support for your outboard motor is a good option. The best thing about a transom saver is that it is quite durable and beginner-friendly.

You don’t have to follow any extensive installation methods. You can simply add the transom saver by attaching it to the back of your trailer. So, if you’re new to trailering, then this product will prove to be quite useful in the long run.

If, for some reason, you’re struggling to manage the transom saver on the back of the vehicle, then make sure to seek help from customer support. Similarly, you can rely on local experts for help.


That way, you won’t have to do any guesswork to secure your Outboard motor.

  1. Use A Ratchet Strap

Along with the transom saver, you can rely on the ratchet strap to further add to the stability of the unit. Even if you install the transom saver to the bottom piece of the motor, there might still be some wobble on the upper sections.

Minimizing this wobble will improve the trailering experience by a substantial margin. Luckily, you can rely on products like a ratchet strap to cover the wobbling action of the outboard motors.

All you need to do is strap the upper section of the outboard motor to the levers on your boat or the trailer.

Make sure that the strap is completely tight and there isn’t much space left for the wobbling action. After removing the slag from the ratchet strap, make sure to test it by moving the trailer for a few meters.

That should give you an accurate idea of whether or not your outboard motor is secure. For more strength, you can always combo a ratchet strap with a transom saver, and it will keep your outboard motor perfectly straight while trailering.

  1. Use M-Y Wedge

This is one of the easier methods for anglers that is compatible with ram trims on your unit. While using this unit, it will be quite easy to manage the wobbling of the motor.

You just have to place this product on the trim rams. Then, lower the motor to put pressure on the wedge.

Once the wedge is somewhat compressed, you can test the system by driving the trailers. In most situations, you won’t have to bother with any other solution. The M-Y wedge will take care of the outboard movement.

However, if you are going through a rough patch, then using a ratchet strap will further improve the stability. So, make sure to modify the setup according to the conditions of the road you will be covering.

With that said, there are many products on the market that can help keep your outboard motor straight while trailering.

Depending upon your budget, either one of these methods should help secure the motor in one place.

So, make sure to browse through the wide range of transom savers and other support systems to find the perfect fit for your boat.


Similarly, you should also ask other anglers about their experiences with different support units.

  1. Using Other Equipment For Stability

The solutions provided above are usually more than enough for most people to understand how they can keep their outboard motor straight while traveling.

Although, if these products are not available in your area or if you want to try something else out then there are tons of other options available.

When it comes to this, it is essential that you first spend your time going through different products. This should help you in understanding the features of these so that your choice can be much easier.

Once you have a product that meets all of your requirements you can then purchase it.

The installation process varies from product to product which is why you will have to consult the manual provided it.

You can even contact the support team for its brand as they should be able to guide you through the process. The support team should also help you out in case of any issues.

Other than this, people should not have many problems when trying to keep their outboard motor straight. If you are still feeling confused, then it is best that you find dealers that have these products available.

This should allow you to test out the equipment yourself before purchasing it.

This is a great way of ensuring that the outboard motor you are using meets your demands.

Finally, you should also ensure that the weight on your boat is properly distributed as this also plays a huge role when trying to keep the outboard motor straight.

Leave a Comment