Rhodan trolling motors might not be the most powerful units on the market, but you won’t have to worry about any performance issues while relying on these devices. Thousands of anglers across the nation have been using this trolling motor without any serious issues. So, if you’re looking for a solid unit that matches your budget requirements, then going through this portfolio will help you find the perfect unit for your boat. Now even though this is one of the most reliable options in the market, you can expect some minor problems from time to time. Luckily, these problems can be fixed rather easily, and the following list should give you more perspective on these problems.
Rhodan Trolling Motor Problems
1. Losing Speed
One of the most common problems that you will often hear about is the Rhodan trolling motor will lose power in the middle of the fishing trip. It can be quite annoying to deal with this issue, and the only thing you can do is inspect the battery system for possible issues. There is a good chance that you’re dealing with a drained battery that has to be replaced immediately.
Make sure to rely on a multimeter to isolate this problem battery. However, If the reading on the multimeter is optimal, then the issue is related to wiring and corroded connection points.
2. Anchor Mode Issues
This issue is more technical in nature and can be traced back to a defective motherboard in your unit. Sadly, you can’t fix this problem yourself, and the only solution is reaching out to the experts and securing a board replacement for your unit. So, make sure to reach out to customer support and explain your issue to them.
In some situations, removing interference and changing the orientation of the GPS antenna is a good option to fix the anchor mode issues. So, you should test your luck and change the positioning of the antenna.
3. Controller Problems
Issues with the controller are also pretty common when you’re dealing with the Rhodan trolling motor. Luckily, it is not that challenging to maneuver through these problems with the motor not responding to commands of the controller.
All you need to do is install new batteries in the unit and make sure that the terminals don’t have any rust build-up. If there is rust on the terminals, you will have to clean it out and then try using the controller again. It should work without further issues.
4. Wiring Issues
Wiring problems with the controller are also pretty common for users that ignore the care requirements of the motor for too long. So, if your motor is not working and you haven’t serviced the unit for a long time, it might be a good idea to check the wiring in your system. There is a good chance that the wires are kindred or the connection points are corroded.
To fix this issue, you just have to replace the kinked sections and clean out the connection points with a vinegar solution. Once the wiring has been fixed, test out the unit again, and it will work perfectly.
5. Noise Problems
Noise issues with the motor can be traced back to debris and weeds stuck on the propeller. Cleaning the motor should be enough to get ahead of this problem. However, if you can’t see any excessive amount of weeds on the unit, just remove the propeller and clean out individual components.
After that, you can fix everything back and try to operate the unit again. It should start working without further issues, and you will be able to get the desired performance.
6. Maintenance Difficulties
While this motor is quite durable, some users have pointed out that the maintenance of this motor is somewhat complex. To get ahead of this issue, you should either seek help from an expert or go through the maintenance information given in the owner’s manual. That should give you a better perspective on the maintenance of the motor, and you won’t have to get confused at any step.
All in all, these were a few minor issues pointed out by a few anglers. If you’re sitting on a new unit, then make sure to involve the experts and forward a warranty claim to avoid any excessive headaches.