The performance of the Minn Kota trolling motor is unmatched when you try to compare this unit with the majority of other brands in the market. Even though it is not the cheapest option in the market, you won’t be able to find a better mix between performance and effeminacy. So, if you’re not that concerned about the budget, then going through the Minn Kota portfolio will help you find the best motor for your boat. With that said, a few queries have been recorded on Minn Kota Fortrex problems. If you’re also considering purchasing this trolling motor, then the following list of issues might help you get a better perspective on this process.
Minn Kota Fortrex Problems
1. Low Power
Issues with the low power on the Minn Kota Fortrex are almost always linked with battery problems. So, you should grab a multimeter and check the power output from the battery. There is a good chance that you’re dealing with a drained battery that has to be replaced. Drained batteries can’t hold a charge for a long time and will have a negative impact on motor performance in the long run.
With that said, if your motor is new or the battery was replaced recently, then simply charging the batteries should be enough to fix this problem. All in all, you need to make sure that the power supply to the motor is optimal, and that should be enough to fix the performance issues.
2. Vibration Problems
Even though it is common for users to experience issues with the propeller vibration during full output, your unit shouldn’t vibrate during normal operations. So, you will need to isolate the problem by inspecting the propeller for possible damages. There is also a chance that something has caught up in the propeller, and you need to clean the unit to get ahead of this issue.
If there are broken sections in the propeller, then make sure to get yourself a replacement. However, if the propeller is in perfect shape, then removing it from the assembly and rotating it 180 degrees before reinstallation should be enough to get rid of the excessive vibration. Similarly, removing weeds and debris between the propeller and the housing will help minimize this problem.
3. Steering Issues
There have been quite a few reports where users mentioned issues with the steering of the trolling motor. All of the steering issues are linked to the tension in the cables. If the cables are damaged, or the tension is not optimal, then the slack will make it impossible for users to manage the steering of their unit. So, make sure to manage the system accordingly if you’re struggling with the steering.
In most situations, tightening up the cables a little bit should be enough to get ahead of the steering problems. However, if the steering cable is broken or frayed, then the only thing you can do is install new cables on your unit. Make sure to reach out to customer support regarding this replacement, and they will help you source compatible steering cables.
4. Starting Problems
Some users have also pointed out issues with the Minn Kota Fortrex trolling motor not starting. These issues with the trolling motor can be traced back to corroded connection points and damaged wires in your setup. So, you should first try to clean the connection points with a diluted vinegar solution and then start the motor again. There is a good chance it will start working.
However, if you’re still unable to get the unit working, then you’re dealing with broken wiring or a defective battery. The use of a multimeter will help you isolate the issue, and it will be much easier to get ahead of the problem once you’ve narrowed down the cause.
Calling the Minn Kota customer support is your best option if you’re running into any of the issues mentioned here. The experts working at customer support ensure customers with a quick and efficient troubleshooting process. So, if you’re new to fishing and don’t know how to perform complex steps, then call the company number immediately. They will help you narrow down on the issue, and the problem with your motor will be fixed in no time.