5 Basic Steps To Link Humminbird Helix to Minn Kota Ulterra 

how to link humminbird helix to minn kota ulterra
how to link humminbird helix to minn kota ulterra

Minn Kota has always been in the market for its phenomenal motors. They might not be the most affordable units, but you can’t complain about their performance. From beginners to experts, thousands of anglers rely on Minn Kota motors like Ultrex and Ulterra for their daily adventures. So, browse through the Minn Kota portfolio to find a good option. Lately, anglers have been facing issues with linking the Humminbird Helix unit to Minn Kota Ulterra. While the procedure is not that complex, it can create some confusion among angles. So, if you’re in the same condition, follow these details.

How To Link Humminbird Helix to Minn Kota Ulterra

One of the most effective integrations brought forward by Minn Kota Ulterra is the seamless connection with Humminbird devices. You don’t have to rely on different connectors or converters to connect the motor with devices like the Humminbird Helix. The procedure is fairly simple, and you just have to follow these basic steps to get the motor connected to Humminbird Helix.

  1. To start the connection, you need to purchase ethernet cables to connect to the Helix control head on your boat. Without the ethernet, you won’t be able to integrate the Minn Kota motor with the Fishfinder.
  2. Now, you just have to remove all the power connections from the motor and then find the ethernet cable on the i-Pilot Link. You can use the extension cable to connect to the ethernet and also link the adapter cable with the i-Pilot Link system.
  3. At this point, you just have to bring the cables to the Helix control head or the ethernet switch that is installed on your boat. When using the ethernet switch, make sure to tighten up the bolt to avoid issues with the loose connection on the Helix Control head.
  4. After that, you can turn on the power to the i-Pilot Link and also the Helix control head to manage the configurations. It will take a few seconds for the system to start, but you will get a message on the title screen.
  5. Lastly, just go to the system settings by using the view key and perform an accessory test. This will take more than a minute and inform you about the connection status of the i-Pilot link status. If the accessory doesn’t show up on the system, then there is something wrong with the cables. Check the wiring diagram on the Helix control head and then route the ethernet cables again.

After completing these steps, the Humminbird Helix device should link to Minn Kota Ulterra. You will be able to access all the smart features, and the use of the original controller will be minimized. So, you don’t have to worry about leaving the control center as long as the Minn Kota motor is connected to your Helix unit. The fish finder is more than enough to provide you with all the motor controls as well as charting options to better plan the router. Moreover, you can access the automated stow and deploy features with the click of a button.

Leave a Comment