How To Make a Sabiki Rod At Home (Guide)

how to make a sabiki rod
how to make a sabiki rod

When it comes to catching live bait from the sea, there is no better setup than a Sabiki rig for you. Even though it can be a bit challenging to manage this unit at first, you’ll notice far better results and improved efficiency when you get used to this setup. So, make sure to rely on this fishing setup if you’re struggling to meet the budget and quality requirements for live baits. With that said, quite a few users have asked how to make a Sabiki rod. If you’re struggling with a similar issue and don’t know how to manage the Sabiki rod, then the following information will help you better manage the process.

How To Make a Sabiki Rod? 

Many anglers refuse to pay hundreds of dollars for a Sabiki rod when they can create a similar setup in under 10 dollars. You can also rely on a PVC pipe to create a Sabiki rod that will help you catch a ton of live bait. So, if you’re also trying to save money, then the following steps will help you through the process.

  1. To start the process, you’ll need to get a PVC and cut it down to the desired length. Depending upon your fishing style, you can choose between different lengths of the PVC pipe. After that, you can use a PVC cap to shut one end of the pipe and continue with the process.
  2. Now, you need to get your hose clamps and pass them through the open end of your PVC to the location of the fishing reel. You need to make sure that the clams are close to the end of the pipe for better handling of water.
  3. At this stage, you can use a drill unit to create a hole where the fishing line will be passed to come out from the other end.
  4. Once the hole has been created for the fishing line, you can go ahead and feed the fishing line through the rod and make it come out of the other end of the PVC pipe.
  5. Lastly, you just have to attach a Sabiki rig to the fishing line, and you’re all set for fishing. Just keep in mind that if you’re struggling with hooks getting caught on the PVC pipe, you will need to use a heat gun to flare up the rod, and that should be enough to get around the issue.

All in all, these were a few steps that you need to follow to make a Sabiki rod in under 10 dollars. Even if you don’t have the necessary tools, it would be cheaper to go to your local workshop and rent out a few tools. So, if you’re running low on budget, then going with this fishing setup is the perfect option for you.

With that said, there have been a few complaints about the flexibility of the PVC pipe and its inferiority when compared with the branded Sabiki rods. So, you’ll have to set aside an adequate budget for the fishing rig.

Leave a Comment