Mercury Outboards are one of the first options that come up when you look towards high-tier engines for your boat. While these units bring a phenomenal hole shot for your boat, you will be spending a fair bit of budget on these units. So, if you value performance and can work with a flexible budget, the Mercury Outboards are one of the best engines for your boat. The only issue that you will sometimes face with the Mercury Outboard is that it stalls at idle. Luckily, you can maneuver through this problem rather quickly by following these basic steps.
Mercury Outboard Stalls At Idle
1. Fix Fuel Injectors
If the Mercury Outboard is stalling at idle, try to find issues with the defective injectors for clogging issues. If you’ve not serviced the unit in a long time, then there is a huge possibility that you’re in a similar situation.
The good thing here is that you can fix the stalling issue by cleaning the injectors. So, if you’re using an older outboard from Mercury, simply take apart the system and service the fuel injectors to streamline the flow of fuel.
2. Clean Carburetor
Depending upon the model you’re currently using, a dirty carburetor can also cause simple problems. Experts have pointed out that the orientation of the idling screw on the carburetor can cause this problem with the system. So, if you’re in this situation, try to clean the carburetor and tighten up the idling screw.
A quick adjustment to this screw after a cleaning cycle is enough to get everything working again. Try to call an expert if you’re not comfortable with fixing the unit yourself.
3. Replace Air Filters
The airflow in the engine has also been known to cause similar issues in the Mercury outboard. Even though you’re not putting any pressure on the system, if the airflow is not appropriately managed, it will lead to stalling issues.
The best thing you can do here is to replace the air filters on your unit. As long as there are no clogging issues with the venting system, there will be sufficient air in your engine for the fuel to burn. So, fix the airflow if the motor is stalling under no load.
4. Inspect Valves
Kinked or damaged fuel valves can also create simile problems where you will notice stalling problems because of insufficient fuel supply to the engine. So, if you’re sure that the airflow is optimal and you’ve recently changed the filters, then inspect the fuel valves for possible damages. If you can isolate the issue to a broken valve, then replacing it is the only viable option.
5. Call Mercury
Lastly, if the issue remains unfixed after cleaning the system and fixing the fuel and air supply, then calling Mercury support is your best bet. An expert from customer support will make it much easier to isolate the problem, and you will have a better perspective on the troubleshooting process. So, simply service the system and then call Mercury support for further help.