How To Install The Garmin Striker 4 – A Walkthrough

how to install garmin striker 4
how to install garmin striker 4

The Garmin Striker 4 device is known in the market because of its easy installation, and there are no extensive procedures involved when you’re using this compact machine. You can quickly hook up this system yourself, and there is no need to hire a professional to help with this installation. As long as you keep the battery wires and the power cable in good condition, you won’t have to worry about anything. You don’t have to worry about modifying the mount for this Fishfinder, and it is incredibly easy to set up. The following details will further improve your perspective on how to install Garmin Striker 4.

How To Install The Garmin Striker 4

The transducer installation is the only complicated step when you’re using the Garmin Striker 4. However, the included mount makes it effortless for anglers to install Garmin Striker 4, and you can simply follow these steps to get started.

  1. Start by crimping down the battery connections with relevant connectors and storing the battery pack along with all cables in a dry box. Make sure that there is space for the power cable to easily come out of the box, and you can create an opening for this wire.
  2. Now, you have to find a suitable spot to attach the transducer mount to the back of your boat. You will have to drill holes to install this mount, but some anglers prefer to glue a piece of starboard to the back of the boat and then drill holes on this piece to avoid damaging the boat. So, you can decide for yourself whether or not it is a smart idea to attach the transducer directly to the boat.
  3. Once the mount is installed, you can fix the transducer and use wire straps to run the cable through the boat. Make sure that there are no loose sections and that the transducer cable is firmly secured with the frame of the boat to avoid any damage in rough conditions.
  4. Next, you can follow the same starboard method to install the Fish Finder mount on any desired spot present on your boat. Depending upon the thickness of the starboard, you will have to double stack the starboard. That way, the screws won’t penetrate into the boat frame.
  5. Lastly, just hook up the wires from the transducer and the power cable from the dry box with the main Garmin Striker 4 system and press the power button to start up the unit. If the cables are not damaged, and the wiring is managed properly, your Garmin Striker 4 will start up at this point.

These are a few steps that you need to follow to install Garmin Striker 4 on your boat. Once the unit is fully functional, you can make small adjustments to the angle and the position of the transducer to avoid unnecessary issues. You can further reach out to the professionals working at the Garmin customer support department to help with any performance-related issues. They will help you isolate the problem quickly while also walking you through relevant troubleshooting methods.

Leave a Comment