4 Common Twin Troller X10 Problems (With Solutions)

twin troller x10 problems
twin troller x10 problems

The Twin troller X10 is one of the affordable options that lets anglers optimize their fishing trip.

With this unit, you won’t have to focus as much on managing the speed and direction of the boat. It is quite easy to handle and brings an exceptional level of stability to the users.

Aside from this, the device is also equipped with protected recessed motors.

These can be amazing as the boat is protected from debris and weeds in the water you are traveling in. The premium seating makes the vehicle comfortable to travel in which is also great.

So, if you’re looking for a reliable boat on a budget, then Twin Troller X10 might just be the right fit for your fishing needs.

With that said, quite a few users have also asked about Twin troller X10 problems. When it comes to this, some things should be considered.

If you’re also interested in this purchase and need a better perspective on the Twin Troller X10 problems, then the following details might help.

This is because we will be providing you with some of the most common issues that you can run into along with ways to fix them.

Twin Troller X10 Problems

  1. Entanglement Issues In Wires

The leading concern with the design of this boat is that users often complain about entanglement issues with the Twin Troller X10.

Even though this unit is equipped with a powerful motor, excessive amounts of weeds and debris can have a negative impact on the system’s performance.

So, you will be struggling to get the desired level of functionality if you have not cleaned the unit in a long time.

damaged wire

Hence it is best that you make a habit of cleaning the vehicle on time. This should be done every time you go out on a trip as there is a high chance of your boat getting dirty.

In this situation, the only thing you can do is manual through clearer regions and try to follow a strict maintenance cycle.

If you ignore the maintenance of this unit for too long, it will only decrease the lifespan of this boat, and you will have to spend a lot of money on replacement components.

So, make sure to spend the money accordingly to avoid any issues with the motor.

The maintenance steps are fairly easy to follow, and people should not have much trouble with them. However, if you notice that these are technical then you might be a beginner.

This is why the brand provides its users with a complete manual that can be followed.

Going through this should help you in getting a guide that can be followed. You can also look for video guides online to further help you out.

  1. Leaking Problems and Rust

There have also been a few reports where users mentioned that the water would start to leak in after the glue from the fittings is removed.

Over time, the glue will be eaten by water, and the fittings will start to become rusty.

Once the rust layer reaches a certain point, you will notice that the water will start leaking into the boat. It can be quite annoying to deal with this problem, and it usually occurs in older boats.

water drop

With that said, you can get ahead of this problem by timely taking care of the rusting problems and reapplying waterproof glue over the fittings.

That way, the glue won’t’ get dissolved in the water, and you will have a much better chance of avoiding these leaking problems.

So, make sure to apply a second layer of waterproof glue. Now that you understand this, some people might have trouble purchasing glue.

When it comes to this, it is recommended that you take your time researching products that have better effectiveness.

There are tons of options that you can choose between which further confuses people. Though it is best that you go through all of these products first.

This helps users in finding glue that will last them a long time without having to worry about problems.

You should note that the time required for the glue to dry varies depending on its brand. This is why keep the information in mind when using the product.

  1. Damaged Wiring Harness Inside Vehicle

Aside from the leaking problems, customers are not too impressed by the presentation and the integrity of the wiring harness.

There have been many reports of users complaining about damaged harnesses in their units.

Luckily, you can secure a replacement by calling customer support, and it is not that difficult to install a new harness.

While the process is simple, this can both be dangerous and technical for beginners to try on their own. Using the manual should help you out in most cases.

Although if the step-by-step information is not enough to install the harness. Then another option that you can go with is searching for guides online.

There should be tons of videos that can be followed to complete the process while avoiding problems.

People should also note that checking the condition of the wiring harness can be helpful. The only thing that they need to do is attach a voltmeter to the harness wiring.

If these are not giving optimal voltages, then there might be something wrong with the cables.

This helps in confirming the problem so that you can deal with it accordingly. The multimeter also helps in isolating the issue so that you don’t start fixing a problem that was never on your vehicle.

multimeter

If you don’t want to install the harness on your own, then make sure to reach out to customer support and explain your issue to them.

It will be much easier to get through the troubleshooting process that way, and you won’t have to spend hours trying to isolate the problem.

Ideally, replacing the harness should limit this issue, and you won’t have to bother with the same problem for years.

  1. Maintenance Issues With Twin Troller X10

While purchasing new units, most people just give focus on the pricing and the performance.

It is quite rare for users to inquire about the maintenance cycle even though it is one of the most important factors that contribute towards the performance of your motor.

Many anglers have pointed out that this boat is quite challenging to maintain, and you have to follow a variety of techniques to clean out the system and service the electrical components efficiently.

So, make sure to go through the owner’s manual thoroughly.

You can also seek help from a local expert, and he will give you a better perspective on the maintenance method.

customer support

So, if you can’t really understand the instructions in the owner’s manual, then your best bet is to reach out to local experts.

They will help you go through the maintenance cycle, and you will be able to limit the time it takes to different service sections.

Hopefully, this information will help you get the ideal performance from your unit, and you won’t have to bother with any performance issues.

      5. Faulty Or Broken Parts On Vehicle

While the problems mentioned above are some of the most common issues that you can run into.

People should note that there are also some parts that might get damaged or become faulty. If this happens then your only choice is to find the root of your problem.

Once this is done, you can then start working on fixing the issue. This can either be done by repairing the damaged parts or you can get these replaced with new ones.

The process can take a lot of time especially if you are new to using vehicles like these.

This is why a better solution is that you contact the support team for Twin Troller X10.

This should allow people to ask the customer support service about the problems found on their vehicles. The team will ask you a few questions that should be answered carefully.

These can help the brand in narrowing down the root of your issue. Once done, you will either be provided with some troubleshooting steps that can be used.

Alternatively, the team will ask you to send your vehicle back to them.

This is where the warranty service comes in as it can be used to get free repairs and replacements.

You have to ensure that the service is still active and that your motor vehicle falls under the guidelines. As long as this is true, you should be able to get your vehicle repaired for free.

If the warranty has run out or the vehicle does not fall under the guidelines, then you will have to pay a small fee for the labor as well as the costs of replaced parts.

This can usually vary depending on the problem you were running into so keep that in mind.

9 thoughts on “4 Common Twin Troller X10 Problems (With Solutions)”

  1. right foot control continues to operate at a very low speed when released and then causes battery to wear down when not in use.

    Reply
    • Steve,
      I had the same problem. You’ll see a bent “wire” linkage on both controllers. They should be bent identically. Mine were not and this resulted in the problem that you’ve described. I would suggest removing both links and bend the right link to be the same as the left link.

      Reply
  2. BOAT IS LOADED DOWN HEAVY WITH WATER IN THE HULL. PULLED TROLLING MOTORS NO WATER COMES OUT. WHAT AM I DOING WRONG?

    Reply
  3. My 2014 twin troller, the left motor is weaker than the right but only going forward, reverse seems to be same power as right motor, why?

    Reply
    • your pushing a rope other than pulling, current and angle of wind and water weight all affect forward speed
      check motor for water leak at mounting bracket do not open motor as rubber seals will be damaged
      Check propeller’s for debris, broken or bent
      Voltage will also affect speed
      variable drive ft petals produce variable resistance the foot pedals work as per design and are not perfect (live with it) go with the linkage balance
      try reversing the harness plugs and if the low speed problem changes to the other motor
      The motors are basically brainless they run or not due to DC voltage
      Check electrical compression lug fittings for tight electrical connection or insulation breakdown (low voltage reading) on forward speed
      Reverse is running as per design(balanced voltage input)

      Reply

Leave a Comment