10 Known Lowrance Active Target Issues (With Fixes)

lowrance active target issues
lowrance active target issues

It may be possible to obtain increased productivity on the water by shortening the amount of time required to drain water and locate fish.

It’s possible that new technology will be employed to track them down and create molds with greater accuracy.

Anglers will be able to see things that were previously concealed from view as a result of Active Target’s provision of more information about fish habitats than has ever been made accessible before.

The following are some of the limitations of the Lowrance Active Target.

Going through these should help people in understanding several things. You can either use the steps to avoid running into problems.

Alternatively, if you are already getting one of these issues then the steps can be used to help you in getting rid of them.

Make sure that you go through the information carefully to ensure that the Lowrance Active Target lasts you a long time without any further problems.

Lowrance Active Target Issues:

  1. Limited Distance

Vision becomes more impaired with increasing depth, particularly below a depth of six feet. When you are in shallow water, it is difficult to see much of anything until the boat comes too near, at which point the fish in the area get scared.


As a direct result of this, an angler’s forward seeing distance rises in proportion to the amount of water depth.

  1. Blended Bottom Signal

The bottom signal will be contaminated by objects that are farther away from the transducer. Other everyday things, such as fish that are a few feet above the water’s surface, may also be included in this category.

As the boat approaches these objects, the bottom will become more apparent and distinct.

It’s possible to see fish on the bottom more clearly beneath the transducer. However, the presence of the boat above them may have heightened their sense of vigilance.

  1. Narrow Beam On Device

The transducer generates a narrow beam, like a laser, which has both advantages and disadvantages. Brushpile brush fish, for example, will stick out rather than blend in with the branches if hanging from the top branches.

However, it makes it more challenging to track a lure. If the beam is only a few degrees out of alignment with the trolling motor, no interest will be shown on the screen.

fishing lure

It’s important to note that bigger lures are more noticeable than smaller ones.

People can usually avoid the issue by using a larger lure in most cases. However, the type of lure required can easily vary depending on what variety you are trying to catch.

This is why it is essential that you keep the information provided above in mind while using the device.

  1. Sparse Cover Issue

It is possible to see fish in open water but not in dense vegetation. Bass may be found in open areas where there is very little weedy vegetation.

The bass’s mobility might help in the detecting process. It is impossible for an angler to locate an unseen bass in the thickets of a weed forest.

All that will be seen is the weed wall. The same is true for brush piles and standing timber. Keep in mind, though, that fish clinging to the bottom will permanently lose their signal when seen from a distance.

Hence the variety you are trying to catch can also play a huge role in how successful you will be. If you are thinking about catching fish that swim at deeper levels, then the Lowrance Active Target should be great for you.

On the other hand, if you are looking for varieties that hide in bushes or around rocks then this device will not be helpful. There is a high chance that the equipment will not detect any fish even if there are tons of them roaming around.

  1. Inactive Fish Readings

A fisher can be caught up in this new technology, so use extreme care. You are able to see the fish, but you will lose a lot of time focusing on the ones that aren’t doing anything.

This is a standard train of thinking for almost everyone who purchases one.

When it is the perfect moment, you must learn to let go. You should note that waiting for some time can also be beneficial in some cases as the variety might have not noticed your lure.

However, it is still recommended that you don’t waste too much time on fish like these.

Generally moving around and looking for other fish is the best option as it increases your chances of getting more catches.

Staying stuck on a single fish will just waste your time and it might even cause other varieties to roam around to hide from you.

  1. Low Battery Capacity


These items are the source of energy for anything on the boat that is connected to the battery.

You may want to think about upgrading the battery capacity of your boat if you spend a lot of time on the sea and use a lot of equipment, such as graphs, live wells, radios, and so on.

Having a larger battery is mostly better even if you have less equipment. This is because you won’t have to worry about the battery running out of power while you are fishing.

The only downside to getting a larger battery is that it can cost you a lot.

If you are on a tight budget, then there might be some brands that offer cheaper batteries. Make sure that you go through these carefully to decide if the product is worth it or not.

Ensuring that the company is reliable can be important as it helps in getting a device that will last you a long time.

  1. Battery Not Working

Aside from the battery capacity, some people using larger batteries also report issues with them running out of power too soon.

When it comes to this, there is a high chance that your battery might be too old. This is quite a common problem, but it can be annoying to deal with.

battery graphic

You should understand that these batteries have a life cycle on them.

As soon as this runs out, the battery will lose its original capacity. This starts to dwindle until the battery is not usable anymore. If your product is at this stage, then it will not charge.

The only solution that you can go with here is to replace the battery with a new one.

Make sure that you purchase the product from a reliable brand as this helps in giving it a longer life. If you are confused about which battery to purchase, then look for some recommendations.

  1. Poor Readout On Device

Large waves make it difficult to understand the graph. A boat’s bow bouncing up and down with wave activity might make it tough to follow what’s seen on the chart. You should practice in calm water if you’re just learning to swim.

Keep in mind that the device can take some time to get used to. This is why if you are a beginner then invest your time and learn how the features work. This can help users in understanding the charts even when the waves are larger.

You can also use the manual provided along with the product to get step-by-step instructions on how the device can be used. Once you have gone through the information, the Lowrance Active Target should be a lot easier for you to use.

  1. Interference On Active Target

The reading might be tainted by noise or interference from other sonar systems. Some fishermen just don’t bother with it at all. As soon as you activate Active Target, you won’t need it.

Lowrance’s Active Target is like any other instrument, whether an axe, a phone, or a hammer. Furthermore, understanding the technology’s limitations is essential if it is to be used appropriately (and hence capture more fish).

Despite these drawbacks, the Lowrance Active Target may help you catch more fish!

  1. Contact Customer Support

technical support

While the information provided above is more than enough to understand how people can avoid issues with the Lowrance Active Target.

There are still some other problems that you might run into. If this happens then you might feel confused as to how the issue can be resolved.

This is where the support team for Lowrance comes in. The company has reliable customer service that can be contacted in case the device starts running into any problems.

The only thing that you need to do is provide the team with all the information required about the issue.

They will then look into the problem and provide you with a solution that can be used.

Make sure that the information you provide them with is accurate. This is because the data helps in isolating problems so that they can be fixed easily.

If the problem cannot be fixed like this, then the team will ask you to send the device back to them. They will either replace the faulty parts on it or provide you with a free replacement.

Leave a Comment