6 Troubleshooting Tips For Raymarine Dragonfly 7 Problems

raymarine dragonfly 7 problems
raymarine dragonfly 7 problems

Sonar units from Raymarine are not as well known as options like Garmin and Lowrance, but that doesn’t mean that these units are subpar. It is true that the quality of Raymarine systems can’t compete with Lowrance, but you will have to pay a significantly less budget for this purchase. Units like the Raymarine Dragonfly 7 do run into issues every now and then, but the problems with this unit are pretty basic. You won’t have to worry about going through any extensive procedures to get the system working perfectly on your boat. The following list of common problems with the Raymarine Dragonfly 7 will further clarify the viability of this unit for your fishing system.

6 Common Raymarine Dragonfly 7 Problems

1. Missing Sonar Data

Anglers often complain about missing sonar units when making use of this unit from Raymarine. Most of the time, this issue is pretty simple where anglers have not updated the sonar settings. So, there is a decent chance that you’re in the same boat with the sonar being disabled in the system configurations.

However, if that is not the case, then you’re dealing with power supply issues to the sonar system. So, make sure to check the relevant power supply cables, and that will give you a better perspective on the Raymarine Dragonfly 7 system missing sonar data.

2. Issues With Depth Reading

When you’re running into issues with the depth reading, the issue is often related to the sensitivity settings. It is pretty hard to find the perfect sensitivity configurations on the first go, and you need to experiment with different settings to get optimal results.

Aside from the basic configuration, you should also focus on decreasing your moving speed, as that can also play into these depth reading issues. So, make sure to manage your pace for a better experience.

3. Display Issues

The majority of problems with the display can be traced back to insufficient power from the source. So, if you’re running into frequent resents and flickering problems, make sure to check the connection points for possible damages. If the connection points are actually damaged, then your only option is to clean up these points and try securing them properly with the power source.

However, if the voltage from the source is sufficient, then you need to focus more on updating the software on your device. There is a good chance that you’re dealing with corrupted data, and updating the unit is the only solution in this situation.

4. Missing GPS Position

This issue is not that common, but there have been a few reports where anglers mentioned no GPS positioning through the Raymarine system. This issue with the Raymarine Dragonfly 7 usually presented itself in rough weather conditions or isolated geographic locations.

So, you will need to relocate and find a better spot to secure a consistent connection. There isn’t much that you can do about this issue except to focus more on finding a better location for your Raymarine system.

5. Raymarine Dragonfly Not Starting

If you’ve installed the unit yourself, then you will likely run into the same situation. It is pretty common for inexperienced anglers to run into these complications where they miss the installation steps and don’t wire up the system correctly. The only thing you can do about this situation is to check the condition of your fuses and breakers.

Make sure everything is wired up correctly and the power cables are not damaged. Aside from that, there is no harm in making use of a multimeter to narrow down on voltage-related issues. Hopefully, that will help you better isolate issues with Raymarine Dragonfly not starting.

6. Transducer Problems

The complaints related to the transducer not working properly with the Raymarine unit can be linked with improper placement of the transducer, and you need to adjust the positioning of the transducer to get the desired performance. Make sure that there are no problems with the cables connected with the transducer, and recheck the connection with the main device.

Overall, these were a few complications that can be expected with the Raymarine system. None of these issues are that serious, and you will be able to fix all of these issues yourself. However, if you’re still stuck in the same problems, then call the experts from Raymarine for help.

Leave a Comment